Weld Gauge Set Includes Cam Type Gauge and Fillet Gauge and Hi-Lo Gauge and Taper Gauge and Porosity Undercuts Checking Gauge and Convexity Concavity Gauge Imperial

❤All Necygoo Products Come with 12 Months Warranty! ❤Features: 1. They are made of stainless steel, not easy to bend and wear, never rust. 2. The weld ruler, with fastening screws, can be fixed at any point which is convenient for readings. 3. All gauges are ground mechanically, so the face is smooth. Specifications: Material: Stainless Steel Color: Silver Measure: Inch and Millimeter. Cam Type Gauge: Linear Measure Range: 0-60mm (0-2 in) Curving Measure Range: 0-20mm (0-1 in) Angle Measure Range: 0-60 Degree Weld Fillet Gauge: Metric Measure Range: 3mm, 4mm, 5mm, 6mm, 8mm 9mm, 10mm, 11mm, 12mm, 14mm, 16mm, 19mm, 22mm, 25mm. Accuracy: Less Than +/- 0.5mm. Imperial Measure Range: 1/8” (3.2mm), 3/16” (4.8mm), 1/4” (6.4mm), 5/16” (7.9mm), 3/8” (9.5mm), 7/16” (11.1mm), 1/12” (12.7mm), 5/8” (15.9mm), 3/4” (19.1mm), 7/8” (22.2mm), 1” (25.4mm). Accuracy: Less Than +/- 1/50” . Weight: 0.32 lb Hi-Lo Welding Gauge: Changes from standard to metric: Simply remove gauge body, turn scales over and replace body. Measures internal alignment of pipe after fit-up/ alignment, cuts radiographic rejects as well as of pipe before and after tacking. Application: Measure internal misalignment, fit- up gap, bevel on end preparation, the crown height of welds, fillet weld size, scribe line, socket welds Size: (Approx.) 6.18" x 2.48"Taper Welding Gauge: Accuracy: 0.1mm Wide measuring (1-15mm or 1/64-5/8 inch) range makes it a convenient tool for measuring diameters of small holes, slots, etc. With imperial gauge on one side while metric on the other side Undercuts Checking Gauge: Range: 0-1/4'' Increment: 1/64'' It can check the size in 1/16'',1/8'',3/16'', 1/4''. It can check undercut depth, crown height, porosity comparison and so on. Convexity Concavity Checking Gauge: Range: 0-3/4'' Increment: 1/4'' or 1/8'' It can check the size of convex or concave. Package: 1 x Cam Type Gauge 1 x Weld Fillet Gauge 1 x Hi-Lo Welding Gauge 1 x Taper Welding Gauge 1 x Undercuts Checking Gauge 1 x Convexity Concavity Checking Gauge 6 x Instructions 6 x Pouches

• ❤6 PCS WELD GAUGE SET❤ Package Includes 1 x Cam Type Gauge, 1 x Weld Fillet Gauge, 1 x Hi-Lo Welding Gauge, 1 x Taper Welding Gauge, 1 x Undercuts Checking Gauge, 1 x Convexity Concavity Checking Gauge, 6 x Instructions, 6 x Pouches. These Weld Gauges Are Suitable for Measuring Length, Height, Width and Angle for Welding. Made of Stainless Steel.
• ❤CAM TYPE GAUGE❤ Linear Measure Range: 0-60mm (0-2 in), Curving Measure Range: 0-20mm (0-1 in), Angle Measure Range: 0-60 Degree.
• ❤WELD FILLET GAUGE❤ Metric Measure Range: 3mm, 4mm, 5mm, 6mm, 8mm 9mm, 10mm, 11mm, 12mm, 14mm, 16mm, 19mm, 22mm and 25mm While Accuracy is Less Than +/- 0.5mm. Imperial Measure Range: 1/8” (3.2mm), 3/16” (4.8mm), 1/4” (6.4mm), 5/16” (7.9mm), 3/8” (9.5mm), 7/16” (11.1mm), 1/12” (12.7mm), 5/8” (15.9mm), 3/4” (19.1mm), 7/8” (22.2mm) and 1” (25.4mm) While Accuracy is Less Than +/- 1/50” .
• ❤HI-LO GAUGE & TAPER GAUGE❤ Hi-Lo Gauge Can Be Used for Measuring Internal Misalignment, Gap, Bevel, The Crown Height of Welds, Fillet Weld Size, Scribe Line, Socket Welds. The Range of The Taper Gauge is 1-15mm (1/32-5/8 inch) with Accuracy of 0.1mm (1/64 inch). Accurate And Can Be Used for Measuring Diameters of Small Holes, Slots, Gap, Etc.
• ❤ UNDERCUTS CHECKING GAUGE & CONVEXITY CONCAVITY GAUGE❤ The Former Can Be Used to Check Undercuts Depth, Crown Height and Porosity And The Range is 0-1/4'' with 1/16'' Scale. With Fastening Screw to Read Measuring Result Easily. The Latter Can Be Used to Check The Tolerance of Convexity And Concavity And The Range is 0-3/4''. With Fastening Screw Can Be Fixed at Any Point Which Is Convenient for Readings.